Team Associated RC8B4.1e Team Kit

Description

The next evolution of the RC8B4 eBuggy is upon us. The heart of the buggy is the new RWB/FWB adjustable weight bias chassis design.
The next evolution of the RC8B4 eBuggy is upon us. Team Associated engineers sought to lower the CG and weight and improve handling on un-groomed outdoor tracks. The heart of the buggy is the new RWB/FWB adjustable weight bias chassis design. The innovative system allows the driver to run either configuration with the motor rearward for more traction, or shift the center diff and flip the center dogbones to run motor forward for more steering.

The suspension is overhauled with new front and rear low-CG shock towers and shorter shocks, along with new 3-hole rear suspension arms that allow for softer shock and spring while still maintaining support in the fast turns. The new wide base rear hubs come in three fixed axle heights and use 3mm carbon fiber hub towers to allow several different geometry options.

Lastly, the buggy comes with 92mm universal joints, 44/13 bevel gears, and a 46T molded spur gear for the most grip and smoothest power delivery on un-groomed outdoor tracks.

Features

New RC8B4.1e RWB/FWB adjustable weight bias chassis design to tune rear grip vs. steering
New low CG and lightweight aluminum front and rear shock towers
New shorter 16mm front and rear shock bodies for lower CG and lighter weight
New 6-hole 1.4mm front and 1.5mm taper rear machined shock pistons included with emulsion shock cap seals
New 3-hole rear suspension arms with updated rear anti-roll bar geometry for both smooth and bumpy tracks
New blue aluminum front upper arm mount for added durability
New molded RC8B4.1 front bumper with optimized profile for bumpy transitions
13-44 Ring and Pinion Bevel Gear Set
92mm universal driveshafts with 17mm outdrives
Updated Soft Blend suspension arms for maximum durability in cold weather
Vehicle Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:8 Scale
Assembly Level: Kit*
Length: 486mm (19.13in)
Width: 304.5mm (11.99in)
Wheelbase: varies
Weight: varies
Internal
Gear Ratio: 3.38:1
Drive: 4WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete:

Batteries for radio-controlled car radio
2S shorty LiPo Battery Pack (2 needed, recommended for lowest CG) (#27382 Zappers SG5 7.6V 6400mAh Shorty LiPo or #27374 Zappers DR 7.6V 6100mAh Shorty LiPo)
4S LiPo Shorty Battery Pack (1 needed) (#27390 Zapper SG5 15.2V 6300mAh Shorty LiPo or #27371 Zapper SG4 15.2V 6100mAh Shorty LiPo)
1:8 scale buggy tires
1:8 scale buggy wheels
CA (cyanoacrylic) glue (#1597 recommended)
Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
Thread-locking compound (#1596 FT Locking Adhesive recommended)
Needle-nose pliers
Hobby knife