APlusLift AP-10SR 10,000 LB 2-Post Single Release Overhead Heavy Duty Car Lift

Description

Industry Leading 3 YEAR WARRANTY for All Parts (Additional $499 Value)
Single Point Safety Lock Release System
Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!
CE Certified Lift Structure and Hydraulic System; 6’9″ Lift Height Maximum with Truck Adapters
Durable Powder Coated Finish on Steel; All Robot Welded Structure
Strong Double “S” Column Design; ; Carriage Material Q355 Stronger Than Normal Q235 Steel
APlusLift AP-10SR car lift is an upgrade from the bestselling HW-10KOH-A model with an addition of single point lock release.
Specification
CE Certified Lift Structure and Hydraulic System
Heavy Duty Design:
Column Steel Thickness: 13/64″
Carriage Steel Thickness: 15/64″
Arm Steel Thickness: 15/64″
Carriage Yoke Thickness: 5/16″
Base Plate Steel Thickness: 5/8″
Driving Mode: Dual hydraulic cylinders, chain drive
Combo (Symmetrical and Asymmetrical) Arm Assembly:
Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
Rear 2 Stage reach from 33 5/8″ to 52 7/8″
Adjustable Screw Pads 4 pieces included
Truck adapters 4 pieces included
Safety Mechanism:
Single point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
Stiffened base plate 5/8″ thickness
Control System:
Lifting by pressing “UP” button
Manual lowering operation
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16″
Overall Width: 134 5/16″
Maximum Lift height with Truck Adapters: 81″
Lifting height without Truck Adapters: 75″
Minimum Height of Arm Top: 4.5″
Carriage to Carriage Width (Drive through clearance): 100″
Column to Column Width: 109″
Time to full rise: 50 sec
Motor: 220V Single Phase 3HP (need a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Concrete Requirement: 6″ at 3500 psi (4″ for vehicles 9000LB and below)
Anchor bolts included